AM572x Sitara ARM applications processors are built to meet the intense processing needs of the modern embedded products.
●AM572x devices bring high processing performance through the maximum flexibility of a fully integrated mixed processor solution. The devices also combine programmable video processing with a highly integrated peripheral set. Cryptographic acceleration is available in every AM572x device.
●Programmability is provided by dual-core ARM Cortex-A15 RISC CPUs with Neon™ extension, and two TI C66x VLIW floating-point DSP cores. The ARM allows developers to keep control functions separate from other algorithms programmed on the DSPs and coprocessors, thus reducing the complexity of the system software.
●Additionally, TI provides a complete set of development tools for the ARM and C66x DSP, including C compilers, a DSP assembly optimizer to simplify programming and scheduling, and a debugging interface for visibility into source code execution.
● For Silicon Revision 1.1 information, see SPRS915
● Dual ARM® Cortex®-A15 Microprocessor Subsystem
● Up to 2 C66x™ Floating-Point VLIW DSP
● Fully Object-Code Compatible With C67x™ and C64x+™
● Up to Thirty-two 16 × 16-Bit Fixed-Point Multiplies per Cycle
● Up to 2.5MB of On-Chip L3 RAM
● Two DDR3/DDR3L Memory Interface (EMIF) Modules
● Supports up to DDR3-1066
● Up to 2GB Supported per EMIF
● Dual ARM® Cortex®-M4 co-processors
● IVA-HD Subsystem
● Display Subsystem
● Full-HD Video (1920 × 1080p, 60 fps)
● Multiple Video Input and Video Output
● 2D and 3D Graphics
● Display Controller With DMA Engine and up to Three Pipelines
● HDMI™ Encoder: HDMI 1.4a and DVI 1.0 Compliant
● 2x Dual-Core Programmable Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS)
● 2D-Graphics Accelerator (BB2D) Subsystem
● Vivante™ GC320 Core
● Video Processing Engine (VPE)
● Dual-Core PowerVR® SGX544™ 3D GPU
● Crypto Hardware Accelerators
● AES, SHA, RNG, DES and 3DES
● Three Video Input Port (VIP) Modules
● General-Purpose Memory Controller (GPMC)
● Enhanced Direct Memory Access (EDMA) Controller
● 2-Port Gigabit Ethernet (GMAC)
● Sixteen 32-Bit General-Purpose Timers
● 32-Bit MPU Watchdog Timer
● Five Inter-Integrated Circuit (I2C) Ports
● HDQ™/1-Wire® Interface
● Ten Configurable UART/IrDA/CIR Modules
● Four Multichannel Serial Peripheral Interfaces (McSPI)
● Quad SPI Interface (QSPI)
● SATA Gen2 Interface
● Eight Multichannel Audio Serial Port (McASP) Modules
● SuperSpeed USB 3.0 Dual-Role Device
● High-Speed USB 2.0 Dual-Role Device
● Four MultiMedia Card/Secure Digital/Secure Digital Input Output Interfaces (MMC/SD/SDIO)
● PCI-Express® 3.0 Subsystems With Two 5-Gbps Lanes
● One 2-lane Gen2-Compliant Port
● or Two 1-lane Gen2-Compliant Ports
● Dual Controller Area Network (DCAN) Modules
● CAN 2.0B Protocol
● Up to 247 General-Purpose I/O (GPIO) Pins
● Power, Reset, and Clock Management
● On-Chip Debug With CTools Technology
● 28-nm CMOS Technology
● 23 mm × 23 mm, 0.8-mm Pitch, 760-Pin BGA (ABC)
