POWER PhotoMOS RELAYS(Voltage Sensitive Type)
●FEATURES
●1\. A voltage sensitive power PhotoMOS relay
●Conventional power PhotoMOS relays are connected externally to an input limiting resistor in order to obtain the appropriate LED current. Adding an internal constant-current element renders the in put limiting resistor unnecessary, making it possible for the PhotoMOS relay to be voltage driven.
●2\. Wide range of input voltages
●Allows a wide range of input voltages from 4 to 30 V DC. The relay can be used in 5V, 12 V or 24 V DC systems.
●3\. Large capacity PhotoMOS relay
●Supports the various types of load control, from very small loads to a maximum 2.7 A for the AC/DC dual type, 3.6 A for the DC-only type.
●4\. Both AC/DC dual types and DC-only types are available
●The AC/DC dual type is capable of bi-directional control, and unlike conventional SSRs, does not have to be used different ly depending on the load. The DC-only type is well suited for control of DC solenoids and DC motors.
●5\. High sensitivity, low ON resistance
●A maximum 3.6 A load can be controlled with the minimum input voltage of 4 V DC. The ON resistance is also low at 0.09 Ω (AQZ102D).
●6\. Small scale, slim type, 4-pin SIL
●Length 21.0 mm×width 3.5 mm×height 12.5 mm. High precision mounting is pos sible because of the small 73.5mm2 area of the 4-pin SIL.
