The AT32UC3C0512C-ALUT is a 32-bit AVR Flash Microcontroller features a floating point unit, FlashVault code protection, single or dual CAN interfaces, dual LIN interfaces, USB with OTG, PWM with dead-time insertion, a 16-channel 12-bit ADC with dual sample-and-hold circuit for simultaneous sampling of 2 signals, a 2-channel 1.5Msps 12-bit analogue DAC. It designed with the multi-layered databus, 64kb on-chip SRAM with dual interfaces, it offers an outstanding data throughput. The microcontroller event system provides a connection between on-chip peripherals to off-load the CPU, saves power consumption and provides a 100% deterministic response to external and internal events. The full-speed USB 2.0 device interface supports several USB Classes at the same time. The On-The-GO (OTG) host interface allows device like a USB flash disk or an USB printer to be directly connected to the processor. It features analogue functions like ADC, DAC, Analogue comparators.
● High-performance, Low-power 32-bit AVR® Microcontroller
● Multi-hierarchy Bus System
● Internal High-speed Flash
● Internal High-speed SRAM, Single-cycle Access at Full Speed
● External Memory Interface on AT32UC3C0 Derivatives
● Interrupt Controller
● System Functions
● Windowed Watchdog Timer (WDT)
● Asynchronous Timer (AST) with Real-time Clock Capability
● Frequency Meter (FREQM) for Accurate Measuring of Clock Frequency
● Ethernet MAC 10/100Mbps interface
● Universal Serial Bus (USB)
● One 2-channel Controller Area Network (CAN)
● One 4-channel 20-bit Pulse Width Modulation Controller (PWM)
● Two Quadrature Decoders
● Two 12-bit Digital-to-analogue Converters (DAC), with Dual Output Sample System
● 4 Analogue Comparators
● Six 16-bit Timer/Counter (TC) Channels
● 1 Peripheral Event Controller
● 5 Universal Synchronous/Asynchronous Receiver/Transmitters (USART)
●Recommended to apply a soldering temperature higher than 250°C, maximum of three reflow passes is allowed per component.
