The ATMEGA162V-8PU is a high-performance, low-power 8-bit AVR RISC-based Microcontroller combines 16kB of programmable flash memory, 1kB SRAM, 512byte EEPROM and a JTAG interface for on-chip debugging. The device supports throughput of 16MIPS at 16MHz and operates between 2.7 to 5.5V. By executing instructions in a single clock cycle, the device achieves throughputs approaching 1MIPS per MHz, balancing power consumption and processing speed. The device is manufactured using the Atmel high-density nonvolatile memory technology. The on-chip ISP flash allows the program memory to be reprogrammed in-system through an SPI serial interface, by a conventional non-volatile memory programmer, or by an on-chip boot program running on the AVR core. The boot program can use any interface to download the application program in the application flash memory.
● Advanced RISC architecture
● Power-on reset and programmable brown-out detection
● Internal calibrated RC oscillator
● External and internal interrupt sources
● Six sleep modes - idle, ADC noise reduction, power-save, power-down, standby and extended standby
● 131 Powerful instructions-most single clock cycle execution
● 32 x 8 General purpose working registers
● Fully static operation
● Up to 16MIPS throughput at 16MHz
● On-chip 2-cycle multiplier
● JTAG (IEEE std. 1149.1 compliant) interface
● Two 8-bit timers/counters with separate prescalers and compare modes
● Two 16-bit timers/counters with Separate prescalers, Compare modes and Capture modes
● Real-time counter with separate oscillator
● Six PWM channels
● Dual programmable serial USARTs
● Master/Slave SPI serial interface
● Programmable watchdog timer with separate on-chip oscillator
● On-chip analog comparator
