The ATTINY1634-MN is a low-power 8-bit CMOS Microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATtiny1634 achieves throughputs approaching 1MIPS per MHz allowing the system designer to optimize power consumption versus processing speed. The AVR core combines a rich instruction set with 32 general purpose working registers. All 32 registers are directly connected to the arithmetic logic unit (ALU), allowing two independent registers to be accessed in a single instruction, executed in one clock cycle. The resulting architecture is compact and code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers. ATtiny1634 provides 16kB flash memory, 256B EEPROM, 1kB SRAM, 18 general purpose I/O lines.
● Advanced RISC architecture
● 125 Powerful instructions most single clock cycle execution
● 32 x 8 General purpose working registers
● Fully static operation
● Dedicated hardware and QTouch® library support for capacitive touch sensing
● One 8-bit and one 16-bit timer/counter with two PWM channels, each
● 12-channel 10-bit ADC
● Programmable ultra low power watchdog timer
● On-chip analog comparator
● Two full duplex USARTs with start frame detection
● Universal serial interface
● Slave I²C serial interface
● DebugWIRE on-chip debug system
● In-system programmable via SPI port
● Internal and external interrupt sources
● Low power idle, ADC noise reduction, standby and power-down modes
● Enhanced power-on reset circuit
● Programmable brown-out detection circuit with supply voltage sampling
● 8MHz Calibrated oscillator with temperature calibration option
● 32kHz Calibrated ultra low power oscillator
