| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 5 Pin |
| Case/Package | TO-220-5 |
| Power Rating | 2 W |
| Number of Outputs | 1 Output |
| Input Voltage (DC) | 32.0 V |
| Output Current | 14 A |
| Number of Positions | 5 Position |
| Power Dissipation | 2 W |
| Input Voltage (Min) | 6 V |
| Output Current (Max) | 14 A |
| Number of Inputs | 1 Input |
| Operating Temperature (Max) | 150 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Power Dissipation (Max) | 2000 mW |
| Input Voltage | 32 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Last Time Buy |
| Packaging | Each |
| Size-Length | 10.67 mm |
| Size-Width | 4.83 mm |
| Size-Height | 16.51 mm |
| Operating Temperature | -40℃ ~ 150℃ (TJ) |
The AUIR3315 is a fully protected 4 terminals High Side Switch input signal is referenced to Vcc. When the input voltage Vcc - Vin is higher than the specified threshold, the output power MOSFET is turned on. When the Vcc - Vin is lower than the specified Vil threshold, the output MOSFET is turned off. A current proportional to the power MOSFET current is sourced to the Ifb pin. Over current shutdown occurs when Vifb-Vin > 4.7V. The current shutdown threshold is adjusted by selecting the proper RIfb. Either over current and over temperature latches off the switch. The device is reset by pulling the input pin high. Other integrated protections (ESD, reverse battery, active clamp) make the switch very rugged in automotive environment.
● Short-circuit protection
● Over-temperature protection
● Charge pump
● Current sense feedback
● Digital diagnostic
● Active gate control for lower EMI
● Programmable over current shutdown
● Active clamp
● ESD Protection
● Input referenced to Vcc
● Reverse battery protection
Infineon
16 Pages / 1.68 MByte
Infineon
138 Pages / 12.05 MByte
Infineon
16 Pages / 0.27 MByte
Infineon
22 Pages / 0.35 MByte
Infineon
2 Pages / 0.03 MByte
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
