| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 2 Pin |
| Current Rating | 4 A |
| Capacitance Tolerance | ±20 % |
| Power Rating | 3 W |
| Resistance | 10 Ω |
| Input Power (Max) | 3000 mW |
| Operating Temperature (Max) | 150 ℃ |
| Operating Temperature (Min) | -40 ℃ |
The B57211P0xxxM3x1 series from EPCOS are radial leaded NTC inrush current limiters (ICLs). These NTC thermistors can be used as inrush current limiters to suppress high inrush current. The high currents in the circuits are caused by low impedance of smoothing capacitors or coils which produce short circuits when the device is switched on. B57211P0xxxM3x1 series ICLs are commonly used in peripheral communication equipment such as switch mode power supplies.
● Black coated thermistor disk, P11 series
● Coating material flame retardant to UL 94 V-0
● Kinked leads of tinned copper wire
● Lead spacing 7.5mm
● High stability of electrical characteristic
● UL approved
● Resistance value at 25°C range from 2.5ohm to 120 ohm
● Tolerance is ±20%
● Maximum steady state current at 25°C range from 1.5A to 6A
● Maximum power at 25°C is 3W
Epcos
20 Pages / 0.43 MByte
Epcos
3 Pages / 0.03 MByte
Epcos
Thermistor NTC 10Ω 20% 2Pin Radial Bulk
TDK-EPC
RESISTOR, TEMPERATURE DEPENDENT, NTC, 10Ω, THROUGH HOLE MOUNT, RADIAL LEADED
TDK-EPC
RESISTOR, TEMPERATURE DEPENDENT, NTC, 10Ω, THROUGH HOLE MOUNT, RADIAL LEADED
TDK
Inrush Current Limiters 4Ω 5A 330uF RMIN@IMAX 0.118Ω
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
