The BQ27510DRZR-G2 is a system-side Li-ion Battery Fuel Gauge that provides fuel gauging for single-cell Li-ion battery packs. The device requires little system microcontroller firmware development. The BQ27510-G2 resides on the system"s main board and manages an embedded battery (non-removable) or a removable battery pack. The BQ27510-G2 uses the patented Impedance Track™ algorithm for fuel gauging and provides information such as remaining battery capacity (mAh), state-of-charge (%), run-time to empty (min.), battery voltage (mV) and temperature (°C). Battery fuel gauging with the BQ27510-G2 requires only PACK+ (P+), PACK- (P-) and thermistor (T) connections to a removable battery pack or embedded battery.
● Accurate battery fuel gauging
● Battery low interrupt warning
● Battery insertion indicator
● 64 bytes of non-volatile scratch pad flash
● I²C for connection to system microcontroller port
● Battery fuel gauging based on patented impedance Track™ technology
● Green product and no Sb/Br
●Device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
