C8051F020 Datasheet PDF - Silicon Labs

SYSTEM OVERVIEW

●The C8051F020/1/2/3 devices are fully integrated mixed-signal System-on-a-Chip MCUs with 64 digital I/O pins (C8051F020/2) or 32 digital I/O pins (C8051F021/3). Highlighted features are listed below; refer to Table 1.1 for specific product feature selection.

●• High-Speed pipelined 8051-compatible CIP-51 microcontroller core (up to 25 MIPS)

●• In-system, full-speed, non-intrusive debug interface (on-chip)

●• True 12-bit (C8051F020/1) or 10-bit (C8051F022/3) 100 ksps 8-channel ADC with PGA and analog multiplexer

●• True 8-bit ADC 500 ksps 8-channel ADC with PGA and analog multiplexer

●• Two 12-bit DACs with programmable update scheduling

●• 64k bytes of in-system programmable FLASH memory

●• 4352 (4096 + 256) bytes of on-chip RAM

●• External Data Memory Interface with 64k byte address space

●• SPI, SMBus/I2C, and (2) UART serial interfaces implemented in hardware

●• Five general purpose 16-bit Timers

●• Programmable Counter/Timer Array with five capture/compare modules

●• On-chip Watchdog Timer, VDD Monitor, and Temperature Sensor

●ANALOG PERIPHERALS

●\- SAR ADC

●   • 12-Bit (C8051F020/1)

●   • 10-Bit (C8051F022/3)

●   • ± 1 LSB INL

●   • Programmable Throughput up to 100 ksps

●   • Up to 8 External Inputs; Programmable as Single-Ended or Differential

●   • Programmable Amplifier Gain: 16, 8, 4, 2, 1, 0.5

●   • Data-Dependent Windowed Interrupt Generator

●   • Built-in Temperature Sensor (± 3°C)

●\- 8-bit ADC

●   • Programmable Throughput up to 500 ksps

●   • 8 External Inputs

●   • Programmable Amplifier Gain: 4, 2, 1, 0.5

●\- Two 12-bit DACs

●   • Can Synchronize Outputs to Timers for Jitter-Free Wave form Generation

●\- Two Analog Comparators

●\- Voltage Reference

●\- Precision VDD Monitor/Brown-Out Detector

●ON-CHIP JTAG DEBUG & BOUNDARY SCAN

●\- On-Chip Debug Circuitry Facilitates Full- Speed, Non Intrusive In-Circuit/In-System Debugging

●\- Provides Breakpoints, Single-Stepping, Watchpoints, Stack Monitor; Inspect/Modify Memory and Registers

●\- Superior Performance to Emulation Systems Using ICE Chips, Target Pods, and Sockets

●\- IEEE1149.1 Compliant Boundary Scan

●\- Low-Cost, Complete Development Kit

●HIGH SPEED 8051 µC CORE

●\- Pipelined Instruction Architecture; Executes 70% of Instruction Set in 1 or 2 System Clocks

●\- Up to 25 MIPS Throughput with 25 MHz Clock

●\- 22 Vectored Interrupt Sources

●MEMORY

●\- 4352 Bytes Internal Data RAM (4k + 256)

●\- 64k Bytes FLASH; In-System programmable in 512-byte Sectors

●\- External 64k Byte Data Memory Interface (programmable multiplexed or non-multiplexed modes)

●DIGITAL PERIPHERALS

●\- 8 Byte-Wide Port I/O (C8051F020/2); 5V tolerant

●\- 4 Byte-Wide Port I/O (C8051F021/3); 5V tolerant

●\- Hardware SMBus™ (I2C™ Compatible), SPI™, and Two UART Serial Ports Available Concurrently

●\- Programmable 16-bit Counter/Timer Array with 5 Capture/Compare Modules

●\- 5 General Purpose 16-bit Counter/Timers

●\- Dedicated Watch-Dog Timer; Bi-directional Reset Pin

●CLOCK SOURCES

●\- Internal Programmable Oscillator: 2-to-16 MHz

●\- External Oscillator: Crystal, RC, C, or Clock

●\- Real-Time Clock Mode using Timer 3 or PCA

●SUPPLY VOLTAGE .......................... 2.7V TO 3.6V

●\- Typical Operating Current: 10 mA @ 20 MHz

●\- Multiple Power Saving Sleep and Shutdown Modes

●   100-Pin TQFP and 64-Pin TQFP Packages Available Temperature Range: -40°C to +85°C