The CC2533 is an optimized system-on-chip (SoC) solution for IEEE 802.15.4 based remote-control systems. It enables single-chip remote controls to be built with low bill-of-material cost when used as a flexible SoC. It also provides a simple path to adding RF4CE capability to a device or target when used in the wireless network processor configuration of the RemoTI RF4CE stack. Robust network nodes can be built with very low total bill-of-material costs.
●The CC2533 combines the excellent performance of a leading RF transceiver with a single-cycle 8051 compliant CPU, up to 96-KB in-system programmable flash memory, up to 6-KB RAM, and many other powerful features. The CC2533 has efficient power modes with RAM and register retention below 1 µA, making it highly suited for low-duty-cycle systems where ultralow power consumption is required. Short transition times between operating modes further ensure low energy consumption.
●Combined with the golden-unit-status RemoTI stack from Texas Instruments, the CC2533 provides a robust and complete ZigBee RF4CE remote-control solution. It is also ideal for implementing the target side of a remote-control system in a network processor configuration with an SPI/UART/I2C interface. The CC2533 comes complete with reference designs and example software that implement a remote control system to ensure efficient design-in.
●The CC2533 exists in three memory-size configurations:
●CC2533F32
● – 32-KB Flash, 4-KB RAM
●CC2533F64
● – 64-KB Flash, 4-KB RAM
●CC2533F96
● – 96-KB Flash, 6-KB RAM
● RF/Layout
● 2.4-GHz IEEE 802.15.4 Compliant RF Transceiver
● Excellent Receiver Sensitivity and Robustness to Interference
● Programmable Output Power Up to 4.5 dBm
● Boost-Mode TX at 7 dBm
● Very Few External Components
● Only a Single Crystal Needed for Asynchronous Networks
● Space-Saving 6-mm × 6-mm QFN40 Package
● Suitable for Systems Targeting Compliance With Worldwide
●Radio-Frequency Regulations: ETSI EN 300 328 and EN 300 440 (Europe),
●FCC CFR47 Part 15 (US), and ARIB STD-T-66 (Japan)
● Pin- and Software-Compatible With the CC2530Fxxx Series
● Low Power
● Active-Mode RX (CPU Idle): 25 mA
● Active Mode TX at 0 dBm (CPU Idle): 28.5 mA
● Power Mode 1 (4 µs Wake-Up): 0.2 mA
● Power Mode 2 (Sleep Timer Running): 1 µA
● Power Mode 3 (External Interrupts): 0.5 µA
● Wide Supply-Voltage Range (2 V–3.6 V)
● Microcontroller
● High-Performance and Low-Power 8051 Microcontroller Core
●With Code Prefetch
● 64- or 96-KB In-System-Programmable Flash
● 4- or 6-KB RAM With Retention in All Power Modes
● Hardware Debug Support
● Peripherals
● Powerful Five-Channel DMA
● IEEE 802.15.4 MAC Timer, General-Purpose Timers
●(One 16-Bit, Two 8-Bit)
● IR Generation Circuitry
● 32-kHz Sleep Timer With Capture
● CSMA/CA Hardware Support
● Accurate Digital RSSI/LQI Support
● Battery Monitor Comparator
● Random Number Generation
● AES Security Coprocessor
● Two Powerful USARTs With Support for UART and SPI
● I2C Interface
● 23 General-Purpose I/O Pins
● Watchdog Timer
● Development Tools
● CC2533 Remote Control Development Kit for RF4CE
● CC2533 Development Kit
● CC2533EMK Evaluation Modules
● SmartRF™ Software
● Packet Sniffer
● IAR Embedded Workbench™ Available
● APPLICATIONS
● ZigBee™ RF4CE Remote Control Target and Device
● 2.4-GHz IEEE 802.15.4 Systems Based on TIMAC or
●SimpliciTI™ Network Protocol
● Consumer Electronics
● Electronic Shelf Labeling
