●CC2590
● is a cost-effective and high performance RF Front End for low-power and low-voltage 2.4-GHz wireless applications.
●CC2590
● is a range extender for all existing and future 2.4-GHz low-power RF transceivers, transmitters and System-on-Chip products from Texas Instruments.
●CC2590
● increases the link budget by providing a power amplifier for increased output power, and an LNA with low noise figure for improved receiver sensitivity.
●CC2590
● provides a small size, high output power RF design with its 4x4-mm QFN-16 package.
●CC2590
● contains PA, LNA, switches, RF-matching, and balun for simple design of high performance wireless applications.
● Seamless Interface to 2.4-GHz Low Power RF Devices from Texas Instruments
● Up to +14-dBm (25mW) Output Power
● 6-dB Typical Improved Sensitivity on CC24xx and CC2500, CC2510, and CC2511
● Few External Components
● Integrated Switches
● Integrated Matching Network
● Integrated Balun
● Integrated Inductors
● Integrated PA
● Integrated LNA
● Digital Control of LNA Gain by HGM Pin
● 100-nA in Power Down (EN = PAEN = 0)
● Low Transmit Current Consumption
● 22-mA at 3-V for +12-dBm, PAE = 23%
● Low Receive Current Consumption
● 3.4-mA for High Gain Mode
● 1.8-mA for Low Gain Mode
● 4.6-dB LNA Noise Figure, including T/R Switch and external antenna match
● RoHS Compliant 4×4-mm QFN-16 Package
● 2.0-V to 3.6-V Operation
● APPLICATIONS
● All 2.4-GHz ISM Band Systems
● Wireless Sensor Networks
● Wireless Industrial Systems
● IEEE 802.15.4 and ZigBee Systems
● Wireless Consumer Systems
● Wireless Audio Systems