CC430F5135 Datasheet PDF - TI

The Texas Instruments CC430 family of ultralow-power microcontroller system-on-chip (SoC) with integrated RF transceiver cores consists of several devices featuring different sets of peripherals targeted for a wide range of applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features the powerful MSP430 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency.

●The CC430 family provides a tight integration between the microcontroller core, its peripherals, software, and the RF transceiver, making these true SoC solutions easy to use as well as improving performance.

●The CC430F61xx series are microcontroller SoC configurations that combine the excellent performance of the state-of-the-art CC1101 sub-1-GHz RF transceiver with the MSP430 CPUXV2, up to 32KB of in-system programmable flash memory, up to 4KB of RAM, two 16-bit timers, a high-performance 12-bit analog-to-digital converter (ADC) with eight external inputs plus internal temperature and battery sensors on CC430F613x devices, a comparator, universal serial communication interfaces (USCIs), a 128-bit AES security accelerator, a hardware multiplier, a DMA, a real-time clock (RTC) module with alarm capabilities, an LCD driver, and up to 44 I/O pins.

●The CC430F513x series are microcontroller SoC configurations that combine the excellent performance of the state-of-the-art CC1101 sub-1-GHz RF transceiver with the MSP430 CPUXV2, up to 32KB of in-system programmable flash memory, up to 4KB of RAM, two 16-bit timers, a high performance 12-bit ADC with six external inputs plus internal temperature and battery sensors, a comparator, universal serial communication interfaces (USCIs), a 128-bit AES security accelerator, a hardware multiplier, a DMA, an RTC module with alarm capabilities, and up to 30 I/O pins.

●Typical applications for these devices include wireless analog and digital sensor systems, heat cost allocators, thermostats, metering (AMR or AMI), and smart grid wireless networks.

●For complete module descriptions, see the _CC430 Family User’s Guide_ (SLAU259).

● True System-on-Chip (SoC) for Low-Power

●Wireless Communication Applications

● Wide Supply Voltage Range:

●3.6 V Down to 1.8 V

● Ultralow-Power Consumption:

● CPU Active Mode (AM): 160 µA/MHz

● Standby Mode (LPM3 RTC Mode): 2.0 µA

● Off Mode (LPM4 RAM Retention): 1.0 µA

● Radio in RX: 15 mA, 250 kbps, 915 MHz

● MSP430 System and Peripherals

● 16-Bit RISC Architecture, Extended Memory,

●up to 20-MHz System Clock

● Wake Up From Standby Mode in Less Than 6 µs

● Flexible Power-Management System With SVS and Brownout

● Unified Clock System With FLL

● 16-Bit Timer TA0, Timer_A With Five Capture/Compare Registers

● 16-Bit Timer TA1, Timer_A With Three Capture/Compare Registers

● Hardware Real-Time Clock (RTC)

● Two Universal Serial Communication Interfaces

● USCI_A0 Supports UART, IrDA, SPI

● USCI_B0 Supports I2C, SPI

● 12-Bit Analog-to-Digital Converter (ADC) With Internal Reference,

●Sample-and-Hold, and Autoscan Features (CC430F613x and CC430F513x Only)

● Comparator

● Integrated LCD Driver With Contrast Control for up to 96 Segments

●(CC430F61xx Only)

● 128-Bit AES Security Encryption and Decryption Coprocessor

● 32-Bit Hardware Multiplier

● Three-Channel Internal DMA

● Serial Onboard Programming, No External Programming Voltage Needed

● Embedded Emulation Module (EEM)

● High-Performance Sub-1-GHz RF Transceiver Core

● Same as in CC1101

● Wide Supply Voltage Range: 2.0 V to 3.6 V

● Frequency Bands: 300 MHz to 348 MHz, 389 MHz

●to 464 MHz, and 779 MHz to 928 MHz

● Programmable Data Rate From 0.6 kBaud to 500 kBaud

● High Sensitivity (–117 dBm at 0.6 kBaud, –111 dBm at

●1.2 kBaud, 315 MHz, 1% Packet Error Rate)

● Excellent Receiver Selectivity and Blocking Performance

● Programmable Output Power Up to +12 dBm for All Supported Frequencies

● 2-FSK, 2-GFSK, and MSK Supported as Well as OOK and Flexible ASK Shaping

● Flexible Support for Packet-Oriented Systems: On-Chip Support for Sync Word

●Detection, Address Check, Flexible Packet Length, and Automatic CRC Handling

● Support for Automatic Clear Channel Assessment (CCA) Before Transmitting

●(for Listen-Before-Talk Systems)

● Digital RSSI Output

● Suited for Systems Targeting Compliance With EN 300 220 (Europe)

●and FCC CFR Part 15 (US)

● Suited for Systems Targeting Compliance With Wireless M-Bus Standard EN

●13757–4:2005

● Support for Asynchronous and Synchronous Serial Receive or Transmit Mode for

●Backward Compatibility With Existing Radio Communication Protocols

● Summarizes Family Members

● For Complete Module Descriptions, See the _CC430 Family User’s Guide_ (SLAU259)