The COP8CBR/CCR/CDR9 Flash microcontrollers are highly integrated COP8 Feature core devices, with 32k Flash memory and advanced features including Virtual EEPROM, A/D, High Speed Timers, USART, and Brownout Reset. This single-chip CMOS device is suited for applica tions requiring a full featured, in-system reprogrammable controller with large memory and low EMI. The same device is used for development, pre-production and volume production with a range of COP8 software and hardware development tools.
● 32 kbytes Flash Program Memory with Security Feature
● Virtual EEPROM using Flash Program Memory
● 1 kbyte Volatile RAM
● 10-bit Successive Approximation Analog to Digital Converter (up to 16 Channels)
● 100% Precise Analog Emulation
● USART with Onchip Baud Generator
● 2.7V – 5.5V In-System Programmability of Flash
● High Endurance -100k Read/Write Cycles
● Superior Data Retention - 100 years
● Dual Clock Operation with HALT/IDLE Power Save Modes
● Three 16-bit Timers:
● Timers T2 and T3 can Operate at High Speed (50 ns Resolution)
● Processor Independent PWM Mode
● External Event Counter Mode
● Input Capture Mode
● Brown-Out Reset (COP8CBR9/CCR9)
● OTHER FEATURES
● Single Supply Operation: 2.7V–5.5V (−40°C to +85°C)4.5V–5.5V (−40°C to +125°C)
● Quiet Design (Low Radiated Emissions)
● Multi-Input Wake-Up with Optional Interrupts
● MICROWIRE/PLUS (Serial Peripheral Interface Compatible)
● Clock Doubler for20 MHz Operation from 10 MHz Oscillator (COP8CCR9/CDR9) with 0.5 µs Instruction Cycle6.67 MHz Operation from 3.33 MHz Oscillator, with 1.5 μs Instruction Cycle (COP8CBR9)
● Thirteen Multi-Source Vectored Interrupts Servicing:External InterruptUSART (2)Idle Timer T0Three Timers (Each with 2 Interrupts)MICROWIRE/PLUS Serial Peripheral InterfaceMulti-Input Wake-upSoftware Trap
● Idle Timer with Programmable Interrupt Interval
● 8-bit Stack Pointer SP (Stack in RAM)
● Two 8-bit Register Indirect Data Memory Pointers
● True Bit Manipulation
● WATCHDOG and Clock Monitor Logic
● Software Selectable I/O OptionsTRI-STATE Output/High Impedance InputPush-Pull OutputWeak Pull Up Input
● Schmitt Trigger Inputs on I/O ports
● High Current I/Os
● Temperature Range: –40°C to +85°C and –40°C to +125°C (COP8CCR9/CDR9)
● Packaging: 44 and 68 PLCC, 44 WQFN, 48 and 56 TSSOP
● True In-System, Real Time Emulation and Debug Tools Available
●All trademarks are the property of their respective owners.
