DAC081C081 Datasheet PDF - TI

The DAC081C08x device is an 8-bit, single-channel, voltage-output digital-to-analog converter (DAC) that operates from a 2.7-V to 5.5-V supply. The output amplifier allows rail-to-rail output swing and has an 4.5-µsec settling time. The DAC081C081 uses the supply voltage as the reference to provide the widest dynamic output range and typically consumes 132 µA while operating at 5 V. It is available in 6-lead SOT and WSON packages and provides three address options (pin selectable).

●As an alternative, the DAC081C085 provides nine I2C addressing options and uses an external reference. It has the same performance and settling time as the DAC081C081. It is available in an 8-lead VSSOP.

●The DAC081C081 and DAC081C085 use a 2-wire, I2C-compatible serial interface that operates in all three speed modes, including high-speed mode (3.4 MHz). An external address selection pin allows up to three DAC081C081 or nine DAC081C085 devices per 2-wire bus. Pin-compatible alternatives to the DAC081C081 are available that provide additional address options.

●The DAC081C081 and DAC081C085 each have a 16-bit register that controls the mode of operation, the power-down condition, and the output voltage. A power-on reset circuit ensures that the DAC output powers up to zero volts. A power-down feature reduces power consumption to less than a microWatt. Their low power consumption and small packages make these DACs an excellent choice for use in battery-operated equipment. Each DAC operates over the extended industrial temperature range of −40°C to +125°C.

●The DAC081C081 and DAC081C085 are each part of a family of pin-compatible DACs that also provide 12- and 10-bit resolution. For 12-bit DACs see the DAC121C081 and DAC121C085. For 10-bit DACs see the DAC101C081 and DAC101C085.

● Ensured Monotonicity to 8-bits

● Low Power Operation: 156 µA Maximum at 3.3 V

● Extended Power Supply Range (2.7 V to 5.5 V)

● I2C-Compatible 2-Wire Interface Which Supports Standard (100-kHz), Fast (400-kHz), and High-Speed (3.4-MHz) Modes

● Rail-to-Rail Voltage Output

● Very Small Package

● Resolution 8 Bits

● INL ±0.6 LSB (Maximum)

● DNL ±0.1 LSB (Maximum)

● Settling Time 4.5 µs (Maximum)

● Zero Code Error +10 mV (Maximum)

● Full-Scale Error −0.7 %FS (Maximum)

● Supply Power

● Normal

● 380 µW (3 V)

● 730 µW (5 V) Typical

● Power Down

● 0.5 µW (3 V)

● 0.9 µW (5 V) Typical

●All trademarks are the property of their respective owners.