DAC101C081CIMK/NOPB Datasheet PDF - TI

The DAC101C081CIMK/NOPB is a 1-channel 10-bit voltage-output Digital-to-analog Converter (DAC) operates from a 2.7 to 5.5V supply. The output amplifier allows rail-to-rail output swing and has an 6µsec settling time. The DAC101C081 uses the supply voltage as the reference to provide the widest dynamic output range and typically consumes 132µA while operating at 5V. As an alternative, the DAC101C085 provides nine I²C™ addressing options and uses an external reference. It has the same performance and settling time as the DAC101C081. It uses a 2-wire, I²C-compatible serial interface that operates in all three speed modes, including high speed mode. An external address selection pin allows up to three DAC101C081 devices per 2-wire bus. Pin compatible alternatives to the DAC101C081 are available that provide additional address options.

● Ensured monotonicity

● Low power operation - 156µA maximum at 3.3V

● Extended power supply range

● Rail-to-rail voltage output

● Setting time - 6µs maximum

● Zero code error - 10mV maximum

● Full-scale error -0.7% FS maximum

● Green product and no Sb/Br