Description
●The DAC121S101 device is a full-featured, general-purpose, 12-bit voltage-output digital-to-analog
●converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes just 177 µA of current at 3.6 V. The on-chip output amplifier allows rail-to rail output swing and the three wire serial interface operates at clock rates up to 30 MHz over the specified supply voltage range and is compatible with standard SPI™, QSPI, MICROWIRE and DSP interfaces. Competitive devices are limited to 20-MHz
●clock rates at supply voltages in the 2.7 V to 3.6 V range.
●Features
●• DAC121S101-Q1 is AEC-Q100 Grade 1 Qualified and is Manufactured on an Automotive Grade Flow.
●• Ensured Monotonicity
●• Low Power Operation
●• Rail-to-Rail Voltage Output
●• Power-on Reset to Zero Volts Output
●• Wide Temperature Range of −40°C to +125°C
●• Wide Power Supply Range of 2.7 V to 5.5 V
●• Small Packages
●• Power Down Feature
●• Key Specifications
●– 12-Bit Resolution
●– DNL -0.15, +0.25 LSB (Typical)
●– 8-µs Output Settling Time (Typical)
●– 4-mV Zero Code Error (Typical)
●– Full-Scale Error at −0.06 %FS (Typical)
●– 0.64-mW (3.6-V) / 1.43-mW (5.5-V) Normal Mode Power Consumption (Typical)
●– 0.14-µW (3.6-V) / 0.39-µW (5.5-V) Power Down Mode (Typical)
●Applications
●• Battery-Powered Instruments
●• Digital Gain and Offset Adjustment
●• Programmable Voltage and Current Sources
●• Programmable Attenuators
●• Automotive