TYPE | DESCRIPTION |
---|
Mounting Style | Surface Mount |
Number of Pins | 6 Pin |
Case/Package | SOT-23-6 |
Number of Outputs | 1 Output |
Supply Current | 135 µA |
Number of Channels | 1 Channel |
Number of Positions | 6 Position |
Number of Bits | 12 Bit |
Sample Rate | 95.0 µHz |
Power Consumption | 345 µW |
Thermal Shutdown | No |
Operating Temperature (Max) | 105 ℃ |
Operating Temperature (Min) | -40 ℃ |
Number of DACs | 1 DAC |
Supply Voltage | 2.7V ~ 5.5V |
Supply Voltage (Max) | 5.5 V |
Supply Voltage (Min) | 2.7 V |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Active |
Packaging | Cut Tape (CT) |
Operating Temperature | -40℃ ~ 105℃ |
The DAC7512N/250G4 is a low-power single 12-bit buffered voltage output Digital-to-analog Converter (DAC) with on-chip precision output amplifier allows rail-to-rail output swing to be achieved. The DAC7512 uses a versatile three-wire serial interface that operates at clock rates up to 30MHz and is compatible with standard SPI™, QSPI™, MICROWIRE™ and DSP interfaces. The reference for the DAC7512 is derived from the power supply, resulting in the widest dynamic output range possible. The DAC7512 incorporates a power-on reset circuit that ensures that the DAC output powers up at 0V and remains there until a valid write takes place in the device. The DAC7512 contains a power-down feature, accessed over the serial interface that can reduce the current consumption of the device to 50nA at 5V. The low power consumption of this part in normal operation makes it ideally suited to portable battery-operated equipment. The power consumption is 0.7mW at 5V reducing to 1uW in powe
● Tested monotonic by design
● Power-ON reset to 0V
● 3 Power-down functions
● Low power serial interface with Schmitt-triggered inputs
● On-chip output buffer amplifier, rail-to-rail operation
● SYNC\interrupt facility
● Green product and no Sb/Br
TI
Digital to Analog Converter, 12Bit, 95KSPS, Serial, 2.7V to 5.5V, SOT-23, 6Pins
Burr Brown
Low-Power, Rail-to-Rail Output, 12Bit Serial Input DIGITAL-TO-ANALOG CONVERTER
TI
DSP, MICROWIRE, QSPI, serial, SPI
TI
TEXAS INSTRUMENTS DAC7512N/250G4 Digital to Analog Converter, 12Bit, 95KSPS, Serial, 2.7V to 5.5V, SOT-23, 6Pins
Burr Brown
Low-Power, Rail-to-Rail Output, 12Bit Serial Input DIGITAL-TO-ANALOG CONVERTER
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.