DAC7571IDBVTG4 Datasheet PDF - TI

The DAC7571IDBVTG4 is a 12-bit low-power rail-to-rail output I²C input Digital-to-analogue Converter. Its on-chip precision output amplifier allows rail-to-rail output swing to be achieved. The DAC7571 utilizes an I²C compatible two wire serial interface that operates at clock rates up to 3.4Mbps with address support of up to two DACs on the same data bus. The output voltage range of the DAC is set to VDD. The DAC incorporates a power-on-reset circuit that ensures that the DAC output powers up at zero volts and remains there until a valid write to the device takes place. The DAC contains a power-down feature, accessed via the internal control register that reduces the current consumption of the device to 50nA at 5V. The low power consumption of this part in normal operation makes it ideally suited for portable battery operated equipment. The power consumption is less than 0.7mW at VDD=5V reducing to 1µW in power-down mode.

● 140µA at 5V Micropower operation

● Power-on reset to zero

● Specified monotonic by design

● On-chip output buffer amplifier

● Rail-to-rail operation

● Double-buffered input register

● Green product and no Sb/Br

●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.