The DLP3000FQB is a Digital Micromirror Device (DMD) that is digitally-controlled micro-opto-electromechanical system (MOEMS) spatial light modulator (SLM) optimized for small form-factor applications. When coupled to an appropriate optical system, the DLP3000 can be used to modulate the amplitude and direction of incoming light. The DLP3000 creates highly flexible light patterns with speed, precision and efficiency. Architecturally, the DLP3000 is a latchable, electrical-in/optical-out semiconductor device. The features 608 x 684 Array of aluminium, micrometer-sized mirrors offering up to WVGA resolution(854 x 480) wide aspect ratio display. The DLP3000 is one of two devices in the DLP® 0.3 WVGA chipset. Proper function and reliable operation of the DLP3000 requires that it be used in conjunction with the DLPC300 controller.
● 0.3" (7.62mm) Diagonal micromirror array
● 7.6µm Micromirror pitch
● ±12° Micromirror tilt angle (Relative to flat state)
● Side illumination for optimized efficiency
● 5µs Micromirror crossover time
● Highly efficient in visible light (420 to 700nm)
● 97% Window transmission
● 88% Micromirror reflectivity
● 86% Array diffraction efficiency
● 92% Array fill factor
● Polarization independent
● Low power consumption at 200mW (Typical)
● Dedicated DLPC300 controller for reliable operation
● Supports high-speed pattern rates of 4000Hz (Binary) and 120Hz (8-Bit)
● 15-bit Double data rate (DDR) input data bus
● 60 to 80MHz Input data clock rate
● Integrated micromirror driver circuitry
