General Description
●The DM9000BI is a fully integrated and cost-effective Industrial-grade low pin count single chip Fast
●Ethernet controller with a general processor interface, a 10/100M PHY and 4K Dword SRAM. It is designed with low power and high performance process interface that support 3.3V with 5V IO tolerance.
●Features
●■ Supports processor interface: byte/word of I/O command to internal memory data operation
●■ Integrated 10/100M transceiver With HP Auto-MDIX
●■ Supports back pressure mode for half-duplex
●■ IEEE802.3x flow control for full-duplex mode
●■ Supports wakeup frame, link status change and magic packet events for remote wake up
●■ Support 100M Fiber interface.
●■ Integrated 16K Byte SRAM
●■ Build in 3.3V to 1.8V regulator
●■ Supports IP/TCP/UDP checksum generation and checking
●■ Supports early Transmit
●■ Supports automatically load vendor ID and
●product ID from EEPROM
●■ Optional EEPROM configuration
●■ Very low power consumption mode:
● – Power reduced mode (cable detection)
● – Power down mode
● – Selectable TX drivers for 1:1 or 1.25:1 transformers for additional power reduction.
●■ Compatible with 3.3V and 5.0V tolerant I/O
●■ DSP architecture PHY Transceiver.
●■ Supports Industrial-grade: -40 °C.~ +85°C
●■ 48-pin LQFP, 0.18 um process