The DP83822EVM is a 10Mbps/100Mbps Ethernet PHY evaluation module. The DP83822EVM supports 100BASE-FX, 100BASE-TX and 10BASE-Te. This design has been tested and validated at UNH for compliance. It is also emissions Class A certified and is rated to +/-8KV IEC61000-4-2 (contact discharge). The DP83822EVM includes two onboard status LEDs, 5V USB connector with onboard LDOs and is SMI accessible using the USB-2-MDIO tool. There are 4-level straps which allow for system configurations without the need to directly accessing PHY registers. External power supplies can be connected to each specified voltage rail for additional system evaluation. The DP83822EVM supports energy efficient Ethernet, wake-on-LAN, start of frame detect IEEE 1588 timestamp and configurable I/O voltages.
● 100BASE-TX, 100BASE-FX and 10BASE-Te compliant
● MII, RMII master, RMII slave and RGMII MAC interfaces
● CDCE925 programmable 2-PLL VCXO clock synthesizer with 1.8V to 3.3V
● SFD IEEE 1588 time stamp
● Low power modes, active sleep, passive sleep, IEEE power down and deep power down modes
● Supports error free data transfer over 150m using CAT5 cable
