TYPE | DESCRIPTION |
---|
Output Voltage | 10.4 V |
Operating Temperature (Max) | 85 ℃ |
Operating Temperature (Min) | -40 ℃ |
Input Voltage | 5.2 V |
The DRV2604LDGSEVM-M is a 16.33x8.97mm breakout board for the DRV2604L Haptic Driver in MSOP package. It contains the DRV2604L with Smart Loop Algorithm, integrated RAM to allow the user to pre-load over 100 customized waveforms, and adds extended actuator support for
●Eccentric Rotating Mass
●(ERM) and
●Linear Resonant Actuators
●(LRA). It also contains the two decoupling capacitors needed to fully operate the driver and header pin outs for each pin on the package to allow quick system prototyping and evaluation of the DRV2604L.
TI
Haptic Driver for ERM/LRA with Waveform Memory and Smart Loop Architecture
TI
Haptic Driver for ERM/LRA with Waveform Memory and Smart Loop Architecture 9-DSBGA -40℃ to 85℃
TI
DRV2604L Low Voltage Haptic Driver for ERM and LRA with Internal Memory and Smart Loop Architecture 9-DSBGA -40℃ to 85℃
TI
DRV2604L Low Voltage Haptic Driver for ERM and LRA with Internal Memory and Smart Loop Architecture 10-VSSOP -40℃ to 85℃
TI
Haptic Driver for ERM/LRA with Waveform Memory and Smart Loop Architecture 9-DSBGA -40℃ to 85℃
TI
DRV2604L Low Voltage Haptic Driver for ERM and LRA with Internal Memory and Smart Loop Architecture 10-VSSOP -40℃ to 85℃
TI
Power Management IC Development Tools DRV2604 EVAL MOD
TI
DRV2604L Low Voltage Haptic Driver for ERM and LRA with Internal Memory and Smart Loop Architecture 9-DSBGA -40℃ to 85℃
TI
DRV2604L Low Voltage Haptic Driver Evaluation Module
TI
DRV2604L ERM and LRA Haptics Evaluation Kit
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.