| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 16 Pin |
| Supply Voltage (DC) | 8.00V (min) |
| Case/Package | HTSSOP-16 |
| Number of Outputs | 1 Output |
| Output Current | 2 A |
| Number of Positions | 16 Position |
| Drain to Source Resistance (on) (Rds) | 830 mΩ |
| Power Dissipation | 3000 mW |
| Quiescent Current | 3.20 mA |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Power Dissipation (Max) | 3000 mW |
| Supply Voltage | 8V ~ 38V |
| Supply Voltage (Max) | 36 V |
| Supply Voltage (Min) | 8 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 5.1 mm |
| Size-Width | 4.5 mm |
| Size-Height | 1.05 mm |
| Operating Temperature | -40℃ ~ 150℃ (TJ) |
The DRV8800PWP is a DMOS full-bridge Motor Driver contains a full H-bridge which can be used to drive a brushed DC motor, one winding of a stepper motor or other devices such as solenoids. A simple PHASE-ENABLE interface allows easy interfacing to controller circuits. The output stages use N-channel power MOSFETs configured as an H-bridge. The DRV880xis capable of peak output currents up to ±2.8A and operating voltage up to 36V. An internal charge pump generates the needed gate drive voltages. A low-power sleep mode is provided which shuts down internal circuitry to achieve a very low quiescent current draw. This sleep mode can be set using a dedicated nSLEEP pin. Internal protection functions are provided for under-voltage, charge pump fault, overcurrent, short-to-supply, short-to-ground and over-temperature. Fault conditions are indicated through the nFAULT pin.
● Low RDS(on) MOSFETs (0.4R typical)
● Low-power sleep mode
● 100% PWM supported
● 3A Overcurrent threshold
● 3µs Overcurrent deglitch time
● 1.2ms Overcurrent retry time
● Green product and no Sb/Br
TI
2.8A Brushed DC Motor Driver (PWM Ctrl)O
TI
TEXAS INSTRUMENTS DRV8800PWPR Motor Driver/Controller, DC Brush, 8V to 36V supply, 2Outputs, HTSSOP-16
TI
TEXAS INSTRUMENTS DRV8800RTYR Motor Driver/Controller, DC Brush, 8V to 36V supply, 2Outputs, QFN-16
TI
2.8A Brushed DC Motor Driver (PH/EN Ctrl) 16-HTSSOP -40℃ to 85℃
TI
DMOS Full-Bridge Motor Driver, 8V to 38V supply, 2.8A/1 Output, QFN-16
TI
DMOS Full-bridge Motor Drivers
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
