The DRV8833CPWPR is a 1A Low Voltage Stepper or Single/Dual Brushed DC Motor Driver (PWM Ctrl) provides a dual-bridge motor driver solution for toys, printers and other mechatronic applications. The device has two H-bridges and can drive two DC brushed motors, a bipolar stepper motor, solenoids or other inductive loads. Each H-bridge output consists of a pair of N-channel and P-channel MOSFETs, with circuitry that regulates the winding current. With proper PCB design, each H-bridge of the DRV8833C can drive up to 700mA RMS (or DC) continuously, at 25°C with a VM supply of 5V. The device can support peak currents of up to 1A per bridge. Current capability is reduced slightly at lower VM voltages. Internal shutdown functions with a fault output pin are provided for over-current protection, short-circuit protection, UVLO and over-temperature. A low-power sleep mode is also provided.
● Dual-H-bridge current-control motor driver
● Integrated current regulation
● Easy Pulse-Width-Modulation (PWM) interface
● VM under-voltage lockout (UVLO) protection
● Over-current Protection (OCP) protection
● Thermal shutdown (TSD) protection
● Fault Indication Pin (nFAULT) protection
● Green product and no Sb/Br
●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.