| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 16 Pin |
| Supply Voltage (DC) | 2.70V (min) |
| Case/Package | QFN-16 |
| Number of Outputs | 2 Output |
| Output Current | 1.5 A |
| Number of Positions | 16 Position |
| Switching Frequency | 50 kHz |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Supply Voltage | 2.7V ~ 10.8V |
| Supply Voltage (Max) | 10.8 V |
| Supply Voltage (Min) | 2.7 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Size-Length | 4.15 mm |
| Size-Width | 4.15 mm |
| Size-Height | 0.75 mm |
| Operating Temperature | -40℃ ~ 150℃ (TJ) |
The DRV8833RTYT is a dual bridge Motor Driver Solution for toys, printers and other mechatronic applications. The device has two H-bridge drivers and can drive two DC brush motors, a bipolar stepper motor, solenoids or other inductive loads. The output driver block of each H-bridge consists of N-channel power MOSFETs configured as an H-bridge to drive the motor windings. Each H-bridge includes circuitry to regulate or limit the winding current. Internal shutdown functions with a fault output pin are provided for overcurrent protection, short-circuit protection, under-voltage lockout and over-temperature.
● PWM winding current regulation and current limiting
● Dual-H-bridge current-control motor driver - 360mR HS + LS low MOSFET on-resistance
● Outputs can be in parallel for - 3A RMS, 4A peak (PWP and RTY) and 1A RMS, 4A peak (PW)
● Green product and no Sb/Br
TI
Motor Driver, Stepper, 2.7V to 10.8V supply, 1.5A/2Outputs, HTSSOP-16
TI
2A Low Voltage Dual Brushed DC or Single Bipolar Stepper Motor Driver (PWM Ctrl) 16-QFN -40℃ to 85℃
TI
Motor Driver, H-Bridge, 2.7V to 10.8V supply, 1A/2Outputs, HTSSOP-16
TI
TEXAS INSTRUMENTS DRV8833RTYT Motor Driver, 2.7V to 10.8V supply, 1.5A/2Outputs, QFN-16
TI
2A Low Voltage Dual Brushed DC or Single Bipolar Stepper Motor Driver (PWM Ctrl) 16-HTSSOP -40℃ to 85℃
TI
TEXAS INSTRUMENTS DRV8833CRTET Motor Driver, Half Bridge, 2.7V to 10.8V supply, 600mA/2Outputs, WQFN-16
TI
2A Low Voltage Dual Brushed DC or Single Bipolar Stepper Motor Driver (PWM Ctrl) 16-TSSOP -40℃ to 85℃
TI
Power Management IC Development Tools DRV8833 EVAL MOD
TI
1A Low Voltage Stepper or Single/Dual Brushed DC Motor Driver (PWM Ctrl) 16-WQFN -40℃ to 85℃
TI
1A Low Voltage Stepper or Single/Dual Brushed DC Motor Driver (PWM Ctrl) 16-HTSSOP -40℃ to 85℃
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
