DSPIC33FJ64GS606-I/PT Datasheet PDF - Microchip

The DSPIC33FJ64GS606-I/PT is a 16-bit Digital Signal Controller with high-speed PWM, ADC and comparators. The PGECx and PGEDx pins are used for In-circuit Serial Programming™ (ICSP™) and debugging purposes. It is recommended to keep the trace length between the ICSP connector and the ICSP pins on the device as short as possible. The CPU module has a 16-bit (data) modified Harvard architecture with an enhanced instruction set, including significant support for DSP. The CPU has a 24-bit instruction word with a variable length opcode field. The Program Counter (PC) is 23-bit wide and addresses up to 4M x 24 bits of user program memory space.

● Two 40-bit wide accumulators

● Single-cycle (MAC/MPY) with dual data fetch

● Single-cycle mixed-sign MUL plus hardware divide

● ±1% Internal oscillator

● Programmable PLLs and oscillator clock sources

● Low-power management modes (sleep, idle, doze)

● High-speed PWM - Up to 9PWM pairs with independent timing

● High-speed ADC module - Dedicated result buffer for each analogue channel

● Timers/output compare/input capture - Four input capture (IC) modules

● Communication interfaces - Two UART modules (12.5Mbps)

● 4-channel DMA with user-selectable priority arbitration

● Input/output - Selectable open-drain and pull-ups

● Debugger development support - In-circuit and in-application programming

●ESD sensitive device, take proper precaution while handling the device.