SMART 5 BOOT BLOCK FLASH MEMORY FAMILY 2, 4, 8 MBIT
●Intel’s Smart 5 boot block flash memory family provides 2-, 4-, and 8-Mbit memories featuring high-density, low-cost, nonvolatile, read/write storage solutions for a wide range of applications. Their asymmetrically blocked architecture, flexible voltage, and extended cycling provide highly flexible components suitable for embedded code execution applications, such as networking infrastructure and office automation.
●SmartVoltage Technology
●Smart 5 Flash: 5 V Reads, 5 V or 12 V Writes
●Increased Programming Throughput at 12 V VPP
●Very High-Performance Read
●2-, 4-Mbit: 60 ns Access Time
●8-Mbit: 70 ns Access Time
●x8 or x8/x16-Configurable Data Bus
●Low Power Consumption
●Max 60 mA Read Current at 5 V
●Auto Power Savings: <1 mA Typical Standby Current
●Optimized Array Blocking Architecture
●16-KB Protected Boot Block
●Two 8-KB Parameter Blocks
●96-KB and 128-KB Main Blocks
●Top or Bottom Boot Locations
●Extended Temperature Operation
● –40 °C to +85 °C
●industry-Standard Packaging
●40, 48-Lead TSOP, 44-Lead PSOP
●Extended Block Erase Cycling
●100,000 Cycles at Commercial Temp
●10,000 Cycles at Extended Temp
●Hardware Data Protection Feature
●Absolute Hardware-Protection for Boot Block
●Write Lockout during Power Transitions
●Automated Word/Byte Program and Block Erase
●Command User Interface
●Status Registers
●Erase Suspend Capability
●SRAM-Compatible Write Interface
●Reset/Deep Power-Down Input
●Provides Low-Power Mode and Reset for Boot Operations
●Pinout Compatible 2, 4, and 8 Mbit
●ETOX™ Flash Technology
●0.6 µETOX IV Initial Production
●0.4 µETOX V Later Production
