The FAN3213 and FAN3214 dual 4 A gate drivers are designed to drive N-channel enhancement-mode MOSFETs in low-side switching applications by providing high peak current pulses during the short switching intervals. They are both available with TTL input thresholds. Internal circuitry provides an under-voltage lockout function by holding the output LOW until the supply voltage is within the operating range. In addition, the drivers feature matched internal propagation delays between A and B channels for applications requiring dual gate drives with critical timing, such as synchronous rectifiers. This also enables connecting two drivers in parallel to effectively double the current capability driving a single MOSFET.The FAN3213/14 drivers incorporate MillerDrive™ architecture for the final output stage. This bipolar-MOSFET combination provides high current during the Miller plateau stage of the MOSFET turn-on / turn-off process to minimize switching loss, while providing rail-to-rail voltage swing and reverse current capability.The FAN3213 offers two inverting drivers and the FAN3214 offers two non-inverting drivers. Both are offered in a standard 8-pin SOIC package.
●Features
●---
● |
● Industry-Standard Pin out
● 4.5 to 18V Operating Range
● 5A Peak Sink/Source at VDD = 12V
● 4.3A Sink / 2.8A Source at VOUT = 6V
● TTL Input Thresholds
● Two Versions of Dual Independent Drivers:
●\- Dual Inverting (FAN3213)
●\- Dual Non-Inverting (FAN3214)
● Internal Resistors Turn Driver Off If No Inputs
● MillerDrive™ Technology
● 12ns / 9ns Typical Rise/Fall Times with 2.2nF Load
● Typical Propagation Delay Under 20ns Matched within 1ns to the Other Channel
● Double Current Capability by Paralleling Channels
● Standard SOIC-8 Package
● Rated from –40°C to +125°C Ambient
● Automotive Qualified to AEC-Q100 (F085 Version)
