FMS6363 Datasheet PDF - ON Semiconductor

The FMS6363 low-cost video filter (LCVF) is intended to replace passive LC filters and drivers with a low-cost integrated device. Three sixth-order filters provide improved image quality compared to typical lower-order passive solutions. The FMS6363 may be directly driven by a DC-coupled DAC output or an AC-coupled signal. Internal diode clamps and bias circuitry may be used if AC-coupled inputs are required (_see Applications section for details_). The outputs can drive AC-or DC-coupled single (150 Ω) loads. DC-coupling the outputs removes the need for output coupling capacitors. The input DC levels are offset approximately +280 mV at the output (_see Applications section for details_).

●Features

●---

● |

● Three Sixth-order 30 MHz (HD) Filters

● Transparent Input Clamping

● Single video Drive Load (2 Vpp, 150 Ω AV = 6dB)

● AC or DC-coupled Inputs

● AC or DC-coupled Outputs

● DC-coupled Outputs Eliminate AC-coupling Capacitors

● 5 V Only

● Robust 8 KV ESD Protection