The FUSB2805 is a UTMI+ Low-Pin Interface (ULPI) USB2.0 OTG transceiver. It is compliant with the Universal Serial Bus Specification Rev 2.0 (USB2.0), the ULPI Specification Rev. 1.1, and the On-The-Go (OTG)Supplement to USB2.0, Rev. 1.3. The FUSB2805 is optimized to connect the USB2.0 host, peripheral, or OTG-controller to the USB connector via the ULPI link. Data can be transmitted and received at high speed (480Mbps), full speed (12Mbps), and low speed (1.5Mbps) through a 12-bit (SDR) interface.
●Features
●---
● |
● Complies with USB 2.0 OTG Rev 1.3 Supplement and ULPI Rev 1.1 Specifications
● Supports 480Mbps, 12Mbps, and 1.5Mbps USB2.0 Speeds
● Integrated Termination Resistors Meet USB2.0 Resistor ECN
● Integrated Serializer and Deserializer
● Insertion and Removal of Stuffed Bits as Appropriate
● USB Clock and Data Recovery to ±150ppm
● Supports USB OTG Rev 1.3 Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)
