FXLA108 Datasheet PDF - ON Semiconductor

The FXLA108 is a configurable dual-voltage supply translator for both uni-directional and bi-directional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A port tracks the Vlevel and the B port tracks the V level. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V. The device remains in three-state as long as either V to be powered up first. Internal power-down control circuits place the device in 3-state if either VThe /OE input, when HIGH, disables both the A and B ports by placing them in a 3-state condition. The /OE input is supplied by VThe FXLA108 supports bi-directional translation without the need for a direction control pin. The two ports of the device have auto-direction sense capability. Either port may sense an input signal and transfer it as an output signal to the other port.

●Features

●---

● |

● • Bi-Directional Interface between Two Levels: from 1.1V to 3.6V • Fully Configurable: Inputs and Outputs Track VCC • Non-Preferential Power-Up; Either VCC May Be Powered Up First • Outputs Switch to 3-State if Either VCC is at GND • Power-Off Protection • Bus-Hold on Data Inputs Eliminates the Need for Pull-Up Resistors; Do Not Use Pull-Up Resistors • Control Input (/OE) Referenced to VCCA Voltage • Packaged in 20-Terminal DQFN (2.5mm x 4.5mm) • Direction Control Not Necessary • 100Mbps Throughput when Translating Between 1.8V and 2.5V • ESD Protection Exceeds:

● 8kV HBM (per JESD22-A114 & Mil Std 883e 3015.7)

● 2kV CDM (per ESD STM5.3)