| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 8 Pin |
| Case/Package | DIP-8 |
| Input Voltage (DC) | 1.60 V |
| Output Voltage | 15.0 V |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Number of Positions | 8 Position |
| Forward Voltage | 1.6 V |
| Input Current | 20.0 mA |
| Power Dissipation | 60 mW |
| Bandwidth | 1.50 MHz |
| Isolation Voltage | 5000 Vrms |
| Forward Current | 25 mA |
| Input Current (Min) | 25 mA |
| Maximum Forward Voltage (Max) | 1.95 V |
| Forward Current (Max) | 25 mA |
| Power Dissipation (Max) | 60 mW |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Unknown |
| Packaging | Tube |
| Operating Temperature | -55℃ ~ 100℃ |
The HCNR200-000E is a high-linearity Analogue Optocoupler consists of a high-performance AlGaAs LED that illuminates two closely matched photodiodes. The input photodiode can be used to monitor and therefore stabilize the light output of the LED. As a result, the non-linearity and drift characteristics of the LED can be virtually eliminated. The output photodiode produces a photocurrent that is linearly related to the light output of the LED. This can be used to isolate analogue signals in a wide variety of applications that require good stability, linearity and bandwidth. This analogue optocoupler is an excellent solution for many analogue isolation problems.
● 0.01% Low nonlinearity
● Allows flexible circuit design
●It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.
Broadcom
19 Pages / 0.38 MByte
Broadcom
19 Pages / 0.22 MByte
Broadcom
1 Pages / 0.16 MByte
AVAGO Technologies
Optocoupler; THT; Channels:1; Out: photodiode; 5kV; 1Mbps; DIP8
Broadcom
BROADCOM LIMITED HCNR200-000E Optocoupler, Linear, 1Channel, DIP, 8Pins, 5kV
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
