The HCNW136 diode-transistor optocoupler uses an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.
●This single channel optocoupler is available in a Widebody package.
●It is designed for high speed TTL/TTL applications. A standard 16 mA TTL sink current through the input LED will provide enough output current for 1 TTL load and a 5.6 k ohm pull-up resistor. CTR is 19% minimum at IF = 16 mA.
●### Features
● 15 kV/ms Minimum Common Mode Transient Immunity at Vcm = 1500 V (HCPL-4503/ HCPL-0453)
● High Speed: 1 Mb/s
● TTL Compatible
● Available in 8-Pin DIP, SO-8, Widebody Packages
● Open Collector Output
● Guaranteed Performance from Temperature: 0oC to 70oC
● Safety Approval:
●UL Recognized - 3750 V rms for 1 minute (5000 V rms for 1 minute for HCNW and Option 020 devices) per UL1577.
●CSA Approved.
●IEC/EN/DIN EN 60747-5-2 Approved:
●-VIORM = 630 V peak for HCPL-4503 Option 060
●-VIORM = 1414 V peak for HCNW devices
● Dual Channel Version Available (HCPL-253X/ HCPL-4534/ HCPL-053X/ HCPL-0534)
● Options available are:
●020 = UL 5000 V rms/1 Minute Option
●060 = IEC/EN/DIN EN 60747-5-2 Viorm = 630 V peak Option
●300 = Gull Wing Surface Mount Option
●500 = Tape and Reel Packaging Option
●XXXE = Lead Free Option
