The HCNW2611 optocoupler is an optically coupled digital gate that combines a GaAsP light emitting diode and an integrated high gain photo detector. An enable input allows the detector to be strobed. The output of the detector IC is an open collector Schottky-clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification of 10,000 V/ms.
●This unique design provides maximum ac and dc circuit isolation while achieving TTL compatibility. The optocoupler ac and dc operational parameters are guaranteed from -40 degrees C to 85 degrees C allowing troublefree system performance.
●HCNW2611 is suitable for high speed logic interfacing, input/output buffering, as line receivers in environments that conventional line receivers cannot tolerate and is recommended for use in extremely high ground or induced noise environments.
●### Features
● 10 kV/ms Minimum Common Mode Rejection (CMR) at VCM = 1000 V
● High Speed: 10 MBd Typical
● LSTTL/TTL Compatible
● Low Input Current Capability: 5mA
● Guaranteed ac and dc Performance over Temperature: -40 degrees C to 85 degrees C
● Available in 8-Pin DIP, SOIC-8, Widebody Packages
● Strobable Output (Single Channel Products only)
● Safety Approval:
●UL Recognized - 3750 V rms for 1 minute and 5000 V rms for 1 minute per UL1577
●CSA Approved
●IEC/EN/DIN EN 60747-5-2 Approved with Viorm = 1414 V peak
● Options available are:
●300 = Gull Wing Surface Mount Option
●500 = Tape and Reel Packaging Option
●XXXE = Lead Free Option
