The HCS300-I/SN is a Code Hopping Encoder designed for secure remote keyless entry (RKE) systems. The HCS300 utilizes patented KEELOQ® hopping technology incorporates high security to make this device a perfect solution for unidirectional remote keyless entry systems and access control systems. The HCS300 combines a 32-bit hopping code generated by a non-linear encryption algorithm with a 28-bit serial number and 6 status bits to create a 66-bit transmission stream. The length of the transmission eliminates the threat of code scanning and the code hopping mechanism makes each transmission unique, thus rendering code capture and re-send (code grabbing) schemes useless. The encryption key, serial number and configuration data are stored in EEPROM, which is not accessible via any external connection. This makes the HCS300 a very secure unit.
● Programmable 28-bit serial number
● Programmable 64-bit encryption key
● Each transmission is unique
● 66-bit transmission code length
● 32-bit hopping code
● 28-bit Serial number, 4-bit button code, 2-bit status
● Crypt keys are read protected
● Four button inputs
● No additional circuitry required
● 15 functions
● Selectable baud rate
● Automatic code word completion
● Low battery signal transmitted to receiver
● Non-volatile synchronization data
● Easy-to-use programming interface
● On-chip EEPROM
● On-chip oscillator and timing components
● Button inputs have internal pull-down resistors
● Current limiting on LED output
● Low external component cost
●ESD sensitive device, take proper precaution while handling the device.