The HD3SS6126 device is a high-speed, passive switch that is designed for USB applications to route both SuperSpeed USB RX and TX and USB 2.0 DP and DM signals from a source to two destinations or vice versa. The device can also be used for DisplayPort, PCI-Express, SATA, SAS, and XAUI applications. The HD3SS6126 device can be used in either sink-side or source-side applications.
● Ideal for USB Applications
● Signal Switch for USB 3.0 (SuperSpeed USB
●and USB 2.0 HS/FS/LS)
● Three Bidirectional Differential Pair Channel
●MUX/DEMUX Switches Also Suitable for
●DisplayPort, PCIe Gen1/2/3, SATA 1.5/3/6G, SAS
●1.5/3/6G and XAUI Applications
● Supports Data Rates up to 10 Gbps on High-
●Bandwidth Path (SS)
● VCC Operating Range 3.3 V ± 10%
● Wide 3-dB Differential BW of More Than 10 GHz
●on High-Bandwidth Path (SS)
● Uses a Unique Adaptation Method to Maintain a
●Constant Channel Impedance Over the Supported
●Common-Mode Voltage Range
● Excellent High-bandwidth Path Dynamic
●Characteristics (at 2.5 GHz)
● Crosstalk = –35 dB
● Isolation = 23 dB
● Insertion Loss = 1.1 dB
● Return Loss = 11 dB
● Small 3.5 mm × 9 mm, 42-Pin WQFN Package
●(RUA)
● Active Mode Power = 8 mW
