Description
●The IDT7024 is a high-speed 4Kx 16 Dual-Port Static RAM. The IDT7024 is designed to be used as a stand-alone 64K-bit Dual-Port RAM or as a combination MASTER/SLAVE Dual-Port RAM for 32-bit or more word systems. Using the IDT MASTER/SLAVE Dual-Port RAM approach in 32-bit or wider memory system applications results in full-speed, error free operation without the need for additional discrete logic.
●Features
●◆True Dual-Ported memory cells which allow simultaneous reads of the same memory location
●◆High-speed access
●– Military: 20/25/35/55/70ns (max.)
●– Industrial: 55ns (max.)
●– Commercial: 15/17/20/25/35/55ns (max.)
●◆Low-power operation
●– IDT7024S
● Active: 750mW (typ.)
● Standby: 5mW (typ.)
●– IDT7024L
● Active: 750mW (typ.)
● Standby: 1mW (typ.)
●◆Separate upper-byte and lower-byte control for multiplexed bus compatibility
●◆IDT7024 easily expands data bus width to 32 bits or more using the Master/Slave select when cascading more than one device
●◆M/S= H for BUSYoutput flag on Master
● M/S= L for BUSYinput on Slave
●◆Interrupt Flag
●◆On-chip port arbitration logic
●◆Full on-chip hardware support of semaphore signaling between ports
●◆Fully asynchronous operation from either port
●◆Battery backup operation—2V data retention
●◆TTL-compatible, single 5V (±10%) power supply
●◆Available in 84-pin PGA, Flatpack, PLCC, and 100-pin Thin Quad Flatpack
●◆Industrial temperature range (–40°C to +85°C) is available for selected speeds
●◆Green parts availble, see ordering information
