| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 6 Pin |
| Case/Package | DIP-6 |
| Output Voltage | 800 V |
| Output Current | 0.3 A |
| Number of Channels | 1 Channel |
| Number of Positions | 6 Position |
| Forward Voltage | 1.16 V |
| Input Current | 60.0 mA |
| Power Dissipation | 500 mW |
| Isolation Voltage | 5.3 kV |
| Holding Current | 500 µA |
| Forward Current | 60 mA |
| Input Voltage (Max) | 1.35 V |
| Output Voltage (Max) | 560 VAC |
| Maximum Forward Voltage (Max) | 1.35 V |
| Forward Current (Max) | 60 mA |
| Operating Temperature (Max) | 100 ℃ |
| Operating Temperature (Min) | -55 ℃ |
| Power Dissipation (Max) | 500 mW |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Height | 3.81 mm |
| Operating Temperature | -55℃ ~ 100℃ |
The IL4208 is a low input current PhotoTRIAC Output Optocoupler consists of a GaAs IRLED optically coupled to a photosensitive non-zero crossing TRIAC network. The TRIAC consists of two inverse parallel connected monolithic SCRs. High input sensitivity is achieved by using an emitter follower phototransistor and a cascaded SCR pre-driver resulting in an LED trigger current of less than 2mA (DC). The use of a proprietary dV/dt clam results in a static dV/dt of greater than 10kV/µs. This clamp circuit has a MOSFET that is enhanced when high dV/dt spikes occur between MT1 and MT2 of the TRIAC. When conducting, the FET clamps the base of the phototransistors, disabling the first stage SCR pre-driver.
● 300mA On-state current
Vishay Semiconductor
9 Pages / 0.18 MByte
Vishay Semiconductor
8 Pages / 0.44 MByte
Vishay Semiconductor
1 Pages / 0.17 MByte
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
