TYPE | DESCRIPTION |
---|
Mounting Style | Through Hole |
Number of Pins | 10 Pin |
Supply Voltage (DC) | 40.0 V |
Case/Package | TO-100-10 |
Supply Current | 6.7 mA |
Number of Circuits | 1 Circuit |
Number of Channels | 1 Channel |
Power Dissipation | 600 mW |
Common Mode Rejection Ratio | 80 dB |
Quiescent Current | 6.70 mA |
Bandwidth | 25 kHz |
Slew Rate | 400 mV/μs |
Input Offset Voltage | 10 µV |
Input Bias Current | 5 nA |
Operating Temperature (Max) | 85 ℃ |
Operating Temperature (Min) | -25 ℃ |
3dB Bandwidth | 300 kHz |
Power Dissipation (Max) | 600 mW |
Supply Voltage (Max) | 30V ~ 50V |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Not Recommended for New Designs |
Packaging | Each |
Size-Length | 8.96 mm |
Size-Width | 8.96 mm |
Size-Height | 4.7 mm |
Operating Temperature | -25℃ ~ 85℃ |
Think of Texas Instruments" instrumentation amplifier INA101CM differential amplifier the next time you are receiving unwanted sound distortion within your project. Its maximum power dissipation is 600 mW. Its typical dual supply voltage is ±15 V, with a minimum of ±5 V and maximum of ±20 V. This part has a temperature range of -25 °C to 85 °C. This device uses dual power supplies. It has a single channel per chip.
Burr Brown
High Accuracy INSTRUMENTATION AMPLIFIER
TI
The INA101 is a high accuracy instrumentation amplifier designed for low-level signal amplification and general purpo...
TI
Instrument Amplifier, 1 Amplifier, 250µV, 0.04V/µs, 300kHz, ± 5V to ± 20V, DIP
TI
Instrument Amplifier, 3, 50V, 0.04V/ s, 300kHz, 5V to 20V, TO-100
TI
TEXAS INSTRUMENTS INA101KU Instrument Amplifier, 3 Amplifier, 250µV, 0.4V/µs, 25kHz, ± 5V to ± 20V, SOIC
TI
Instrument Amplifier, 1, 50V, 0.04V/ s, 300kHz, 5V to 20V, DIP
TI
Instrument Amplifier, 1 Amplifier, 25µV, 0.4V/µs, 25kHz, ± 5V to ± 20V, TO-100
TI
IC OPAMP INSTR 300kHz TO100-10
TI
IC OPAMP INSTR 300kHz 16SOIC
TI
IC OPAMP INSTR 300kHz 14DIP
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.