| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 16 Pin |
| Case/Package | SOIC-16 |
| Supply Current | 3 mA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Common Mode Rejection Ratio | 106 dB |
| Quiescent Current | 3.00 mA |
| Bandwidth | 2.50 MHz |
| Slew Rate | 17.0 µV/μs |
| Input Offset Voltage | 200 µV |
| Input Bias Current | 20 pA |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -25 ℃ |
| 3dB Bandwidth | 2.5 MHz |
| Minimum CMRR Range | 106 dB |
| Supply Voltage (Max) | 30V ~ 50V |
| Supply Voltage (Min) | 12 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 10.28 mm |
| Size-Width | 7.52 mm |
| Size-Height | 2.35 mm |
| Operating Temperature | 0℃ ~ 70℃ |
The Texas Instruments instrumentation amplifier INA110KUG4 differential amplifier can help you amplify many low power audio samples using not just one, but two channels. Its typical dual supply voltage is ±15 V, with a minimum of ±6 V and maximum of ±18 V. This part has a minimum operating temperature of -25 °C and a maximum of 85 °C. This device uses dual power supplies. It has a single channel per chip.
Burr Brown
Fast-Settling FET-Input INSTRUMENTATION AMPLIFIER
TI
Fast-Settling FET-Input INSTRUMENTATION AMPLIFIER
TI
Instrument Amplifier, 1 Amplifier, 500μV, 17V/µs, 2.5MHz, 12V to 36V, DIP
TI
TEXAS INSTRUMENTS INA110KU Instrument Amplifier, 1, 1mV, 17V/ s, 2.5MHz, 12V to 36V, SOIC
TI
IC OPAMP INSTR 2.5MHz 16CDIP
TI
IC OPAMP INSTR 2.5MHz 16SOIC
Burr Brown
BURR-BROWN INA110KP Instrument Amplifier, 1 Amplifier, 500μV, 17V/µs, 2.5MHz, ± 6V to ± 18V, DIP
TI
TEXAS INSTRUMENTS INA110KPG4 Instrument Amplifier, 3 Amplifier, 500μV, 17V/µs, 2.5MHz, ± 6V to ± 18V, DIP
Burr Brown
Fast-Settling FET-Input INSTRUMENTATION AMPLIFIER
Burr Brown
Fast-Settling FET-Input INSTRUMENTATION AMPLIFIER
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
