INA219EVM Datasheet PDF - TI

The INA219EVM is an evaluation module consists of two boards, INA219 test board and USB DIG platform. The INA219 test board contains the INA219, terminal strips for external connections and several jumpers for device configuration. The USB DIG platform contains an 8052 microcontroller with a built in USB interface. The microcontroller generates the I2C signals necessary to communicate with the INA219. The USB DIG platform also contains, a 3V/5V programmable linear regulator, a switch for power control, general purpose digital I/O and an SPI interface. The evaluation module contains an AC wall adapter (220/120Vac to 6Vdc) to provide 6Vdc to the USB DIG Platform. The INA219 is designed to allow the user to interface it to their system. Simple windows based graphical software allows the user to communicate with and configure the INA219.

● INA219 hardware designer"s kit

● Evaluate INA219 + user"s current shunt design

● Full temperature evaluation

● Software control for designer"s kit

● Communicate with INA219 for evaluation

● Calibrate INA219

●Failure to observe ESD handling procedures may result in damage to EVM components.