The IRS2330DSPBF is a 3-phase high voltage high speed power MOSFET and IGBT Half-bridge Driver with three independent high and low-side referenced output channels. Proprietary HVIC technology enables ruggedized monolithic construction. Logic inputs are compatible with CMOS or LSTTL outputs, down to 3.3V logic. A ground-referenced operational amplifier provides analogue feedback of bridge current via an external current sense resistor. A current trip function which terminates all six outputs is also derived from this resistor. An open drain FAULT signal indicates if an over-current or under-voltage shutdown has occurred. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use at high frequencies. The floating channel can be used to drive N-channel power MOSFET or IGBT in the high-side configuration which operates up to 600V.
● Floating channel designed for bootstrap operation
● Tolerant to negative transient voltage (dV/dt immune)
● Under-voltage lockout for all channels
● Overcurrent shutdown turns OFF all six drivers
● Independent half-bridge drivers
● Matched propagation delay for all channels
● 3.3V Logic compatible
● Outputs out of phase with inputs
● Cross-conduction prevention logic
● Integrated operational amplifier
● Integrated bootstrap diode function
● 2µs Typical dead-time
