Power Distribution Controllers
●This family of fully featured hot swap power controllers targets applications in the +2.5V to +12V range. The
●ISL6115 is for +12V control, the ISL6116 for +5V, the ISL6117 for +3.3V and the ISL6120 for +2.5V control
●applications. Each has a hard wired undervoltage (UV) monitoring and reporting threshold level approximately
●80% of the aforementioned voltage.
●Features
●• HOT SWAP Single Power Distribution Control (ISL6115 for +12V, ISL6116 for +5V, ISL6117 for +3.3V and ISL6120 for +2.5V)
●• Overcurrent Fault Isolation
●• Programmable Current Regulation Level
●• Programmable Current Regulation Time to Latch-Off
●• Rail-to-Rail Common Mode Input Voltage Range (ISL6115)
●• Internal Charge Pump Allows the Use of N-Channel MOSFET for +12V Control (ISL6115)
●• Undervoltage and Overcurrent Latch Indicators
●• Adjustable Turn-On Ramp
●• Protection During Turn-On
●• Two Levels of Overcurrent Detection Provide Fast Response to Varying Fault Conditions
●• 1µs Response Time to Dead Short
●• Pb-Free Available (RoHS Compliant)
●Applications
●• Power Distribution Control
●• Hot Plug Components and Circuit
