ISO721DR Datasheet PDF - TI

DESCRIPTION

●The ISO721, ISO721M, ISO722, and ISO722M are digital isolators with a logic input and output buffer separated by a silicon dioxide (SiO2) insulation barrier. This barrier provides galvanic isolation of up to 4000 V. Used in conjunction with isolated power supplies, these devices prevent noise currents on a data bus or other circuits from entering the local ground, and interfering with or damaging sensitive circuitry.

●FEATURES

●• 4000-V(peak) Isolation, 560-Vpeak VIORM

●– UL 1577, IEC 60747-5-2 (VDE 0884, Rev. 2) IEC 61010-1, IEC 60950-1 and CSA Approved

●– 50 kV/µs Transient Immunity Typical

●• Signaling Rate 0 Mbps to 150 Mbps

●– Low Propagation Delay

●– Low Pulse Skew (Pulse-Width Distortion)

●• Low-Power Sleep Mode

●• High Electromagnetic Immunity

●• Low Input-Current Requirement

●• Failsafe Output

●• Drop-In Replacement for Most Opto and Magnetic Isolators

●APPLICATIONS

●• Industrial Fieldbus

●– Modbus

●– Profibus

●– DeviceNet™ Data Buses

●– Smart Distributed Systems ( SDS™)

●• Computer Peripheral Interface

●• Servo Control Interface

●• Data Acquisition