JN5169/001Z Datasheet PDF - NXP

Overview

●The JN5169 is an ultra low power, high performance wireless microcontroller suitable for ZigBee applications. It features 512 kB embedded Flash, 32 kB RAM and 4 kB EEPROM memory, allowing OTA upgrade capability without external memory. The 32-bit RISC processor offers high coding efficiency through variable width instructions, a multi-stage instruction pipeline and low-power operation with programmable clock speeds. It also includes a 2.4 GHz IEEE802.15.4 compliant transceiver and a comprehensive mix of analog and digital peripherals. The best in class RX operating current (down to 13 mA and with a 0.7 μA sleep timer mode) gives excellent battery life allowing operation direct from a coin cell.

●The peripherals support a wide range of applications. They include a 2-wire compatible I²C-bus and SPI-bus which can operate as either master or slave, a 6-channel ADC with a battery monitor and a temperature sensor. It can support a large switch matrix of up to 100 elements, or alternatively a 40-key capacitive touch pad.

●For support documentation, please click here.

●MoreLess

●## Features

●### Benefits

● Single chip device to run stack and application

● Very low current solution for long battery life; over 10 years

● Very low RX current for low standby power of mains powered nodes

● Integrated power amplifier for long range and robust communication

● High tolerance to interference from other 2.4 GHz radio sources

● Supports multiple network stacks

● Highly featured 32-bit RISC CPU for high performance and low power

● Large embedded Flash memory to enable over-the-air firmware updates without external Flash memory

● System BOM is low in component count and cost

● Flexible sensor interfacing options

● Very thin quad flat 6 × 6 mm, 40 terminal package; lead-free and RoHS compliant

● Temperature range: -40 °C to +125 °C

●### Features: radio

● 2.4 GHz IEEE802.15.4 compliant

● RX current 14.7 mA, in low power receive mode 13 mA

● Receiver sensitivity -96 dBm

● Configurable transmit power, for example:

● 10 dBm, 23.3 mA

● 8.5 dBm, 19.6 mA

● 3 dBm, 14 mA

● Radio link budget 106 dB

● Maximum input level of +10 dBm

● Compensation for temperature drift of crystal oscillator frequency

● 128-bit AES security processor

● MAC accelerator with packet formatting, CRCs, address check, auto-acks, timers

● Integrated ultra low-power RC sleep oscillator (0.7 μA)

● 2.0 V to 3.6 V battery operation

● Deep sleep current 50 nA (wake-up from IO)

● < 0.15 $ external component cost

● Antenna diversity (Auto RX)

●### Features: microcontroller

● 32-bit RISC CPU; 1 MHz to 32 MHz clock speed

● Variable instruction width for high coding efficiency

● Multi-stage instruction pipeline

● 512 kB Flash

● 32 kB RAM

● 4 kB EEPROM

● Data EEPROM with guaranteed 100 k write operations

● ZigBee PRO stack with Home Automation, Light Link and Smart Energy profiles

● 2-wire I²C-bus compatible serial interface; can operate as either master or slave

● 5 × PWM (4 timers, 1 timer/counter)

● 2 low-power sleep counters

● 2 UARTs

● SPI-bus master and slave port, 3 selects

● Supply voltage monitor with 8 programmable thresholds

● 6-input 10-bit ADC, comparator

● Battery and temperature sensors

● Watchdog and Supply Voltage Monitor (SVM)

● Up to 20 Digital IO (DIO) pins

●## Target Applications

● Robust and secure low-power wireless applications

● ZigBee Smart Energy networks

● ZigBee Light Link networks

● ZigBee Home Automation networks

● Toys and gaming peripherals

● Energy harvesting - for example, self-powered light switch

●## Features

● Energy harvesting - for example, self-powered light switch