The JWL5024S15 from XP Power is a JWL50 series regulated single output 50W DC to DC converter in 2" x 1" package. This converter has wide 4:1 input range, internal Pi type input filter, 150mV peak to peak ripple & noise at 20MHz bandwidth measured using 1µF MLCC & 10µF tantalum capacitor. It features 150% overload protection, continuous trip & restart (hicc-up mode) short circuit protection with auto recovery. The isolation resistance is 10^9ohm at 500VDC and isolation capacitance is 2200pF. The JWL50 series has conducted EN55022 class A EMC emissions and EN61000-4-2 ±8KV air discharge, ±6KV contact ESD protection.
● Input voltage range from 9VDC to 36VDC (24VDC nominal voltage)
● Output voltage of 15V and output current of 3.33A
● Input current of 80mA at no load, 2.26A at full load and overvoltage protection of 18V
● Maximum capacitive load of 2000µF and efficiency of 92%
● Line regulation of ±0.5%, load regulation of ±0.5% and switching frequency of 285KHz
● Remote on/off, high power density, six sided metal case and ±1% initial set accuracy at full load
● Input to output isolation of 1500VDC at 60s and temperature coefficient of 0.02%/°C
● CB, IEC60950-1 and UL/cUL60950-1 and ITE safety approvals
● Dimension is 50.8mm x 25.4mm x 11.0mm and weight is 34g
● Operating temperature range from -40°C to +105°C
