| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 20 Pin |
| Supply Voltage (DC) | 7.00V (max) |
| Case/Package | SOIC-20 |
| Number of Outputs | 4 Output |
| Output Voltage | 0.8 V |
| Output Current | 10.0 mA |
| Supply Current | 50 mA |
| Number of Positions | 20 Position |
| Power Dissipation | 1000 mW |
| Operating Temperature (Max) | 150 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Power Dissipation (Max) | 1000 mW |
| Supply Voltage | 4.75V ~ 7V |
| Supply Voltage (Max) | 7 V |
| Supply Voltage (Min) | 4.75 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Operating Temperature | -40℃ ~ 150℃ |
The L297 Stepper Motor Controller IC generates four phase drive signals for two phase bipolar and four phase unipolar step motors in microcomputer-controlled applications. The motor can be driven in half step, normal and wawe drive modes and on-chip PWM chopper circuits permit switch-mode control of the current in the windings. A feature of this device is that it requires only clock, direction and mode input signals. Since the phase are generated internally the burden on the microprocessor, and the programmer, is greatly reduced. Mounted in DIP20 and SO20 packages, the L297 can be used with monolithic bridge drives such as the L298N or L293E, or with discrete transistors and darlingtons.
●Key Features
● RESET INPUT & HOME OUTPUT
● FEW EXTERNAL COMPONENTS
● NORMAL/WAVE DRIVE
● CLOCKWISE/ANTICLOCKWISE DIRECTION
● HALF/FULL STEP MODES
● PROGRAMMABLE LOAD CURRENT
● ENABLE INPUT
● SWITCHMODE LOAD CURRENT REGULATION
ST Microelectronics
11 Pages / 0.16 MByte
ST Microelectronics
52 Pages / 2.96 MByte
ST Microelectronics
68 Pages / 2.22 MByte
ST Microelectronics
23 Pages / 1.25 MByte
ST Microelectronics
5 Pages / 0.16 MByte
ST Microelectronics
**StepMotCtrl 10V SO20 SMD **
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
