L6470H Datasheet PDF - ST Microelectronics

The L6470H is a fully integrated micro-stepping Motor Driver with motion engine and SPI. It is realized in analogue mixed signal technology, is an advanced fully integrated solution suitable for driving 2-phase bi-polar stepper motors with micro-stepping. dSPIN™ Integrates a dual low RDS(ON)DMOS full bridge with all of the power switches equipped with an accurate on-chip current sensing circuitry suitable for non-dissipative current control and over-current protection. The digital control core can generate user defined motion profiles with acceleration, deceleration, speed or target position and easily programmed through a dedicated registers set. All commands and data registers including those used to set analogue values are sent through a standard 5Mbit/s SPI.

● Low RDS(ON)Power MOSFETs

● Programmable speed profile and positioning

● Programmable power MOS slew rate

● Up to 1/128 micro-stepping

● Sensorless stall detection

● SPI interface

● Low quiescent and standby currents

● Programmable non-dissipative over-current protection on high and low-side

● 2-level of over-temperature protection