| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 8 Pin |
| Case/Package | PSOP-EP-8 |
| Number of Outputs | 1 Output |
| Output Voltage | 5 V |
| Output Current | 3 A |
| Number of Positions | 8 Position |
| Quiescent Current | 3.40 mA |
| Number of Regulated Outputs | 1 Output |
| Switching Frequency | 500 kHz |
| Topology | Buck |
| Input Voltage (Max) | 42 V |
| Input Voltage (Min) | 4.5 V |
| Output Voltage (Max) | 5 V |
| Output Voltage (Min) | 5 V |
| Output Current (Max) | 3 A |
| Operating Temperature (Max) | 125 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Supply Voltage | 4.5 V |
| Supply Voltage (Min) | 4.5 V |
| Input Voltage | 4.5V ~ 42V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Cut Tape (CT) |
| Size-Length | 4.9 mm |
| Size-Width | 3.9 mm |
| Size-Height | 1.47 mm |
| Operating Temperature | -40℃ ~ 125℃ (TJ) |
The LM22676MR-5.0/NOPB is a SIMPLE SWITCHER® Step-down Switching Regulator with precision enable provides all of the functions necessary to implement an efficient high voltage step-down regulator using a minimum of external components. This easy to use regulator incorporates a 42V N-channel MOSFET switch capable of providing up to 3A of load current. Voltage mode control offers short minimum on-time, allowing the widest ratio between input and output voltages. Internal loop compensation means that the user is free from the tedious task of calculating the loop compensation components. This regulator is available in fixed output voltage of 5V and good transient response. A precision enable input allows simplification of regulator control and system power sequencing. In shutdown mode the regulator draws only 25µA and Built in soft-start 500µs saves external components. The LM22676 also has built in thermal shutdown and current limiting to protect against accidental overloads.
● Internally compensated voltage mode control
● ±1.5% Feedback reference accuracy
● Precision enable pin
● Integrated boot-strap diode
● Integrated soft-start
● Fully WEBENCH® enabled
● SO PowerPAD and PFM exposed pad
● Green product and no Sb/Br
●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
