The LM25088MH-1/NOPB is a current mode non-synchronous Buck Controller features all the necessary functions to implement an efficient high voltage buck converter using a minimum number of external components. The LM25088 can be configured to operate over an ultra-wide input voltage range of 4.5 to 42V. This easy to use controller includes a level shifted gate driver capable of controlling an external N-channel buck switch. The control method is based upon peak current mode control utilizing an emulated current ramp. The use of an emulated control ramp reduces noise sensitivity of the pulse-width modulation circuit, allowing reliable control of very small duty cycles necessary in high input voltage/low output voltage applications. This controller switching frequency is programmable from 50kHz to 1MHz. Additional features include a low dropout bias regulator, tri-level enable input to control shutdown and standby modes, soft-start and oscillator synchronization capability.
● Emulated current mode control
● Drives external high-side N-channel MOSFET
● Low shutdown and standby modes
● High duty cycle ratio feature for reduced dropout voltage
● Wide bandwidth error amplifier
● Single resistor oscillator frequency setting
● Oscillator synchronization capability
● Programmable soft-start
● High voltage, low dropout bias regulator
● Thermal shutdown protection
● Green product and no Sb/Br
●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.